matrix steel
英 [ˈmeɪtrɪks stiːl]
美 [ˈmeɪtrɪks stiːl]
网络 基体钢
双语例句
- The tempering behaviour of the matrix steel has been investigated by means of the hardness and strength measurements and TEM observation.
通过硬度、强度测定和透射电镜技术研究了基体钢中加Ni的回火特征。 - Approximate Calculation on Elemental Stiffness Matrix for Poles of Steel Portal Frame
变截面门式钢刚架结构杆件单元刚度矩阵近似计算 - The results show that the reinforced particle well bonded with the steel matrix in the steel matrix surface composites in the SHS-casting method.
结果表明：用SHS熔铸法制备的钢基表面复合材料强化相和基体结合良好； - The beam element stiffness matrix of semi-rigidly connected steel frames is derived by using a rotation spring which has variable stiffness to model bending behavior of beam-column semi-rigid connection.
用变刚度的螺旋弹簧模拟梁柱节点半刚性连接的弯曲特性，建立了半刚性连接钢框架梁单元的刚度矩阵。 - Producing WC Particles Reinforced Gray Cast Iron Matrix Steel Rolled Guiding Board in Sand Mold
砂型铸造WC颗粒增强灰铸铁基轧钢导位板的研制 - On the Frame Matrix-steel, s. The forth chapter: the study on how to design and calculate the new mode theoretically.
第四章：新型钢框模板理论设计计算方法。 - Electrolytic dissolving ferritic stainless steel by layers and determination of chromium and silicon in the surface and the matrix of the stainless steel
电解法逐层溶解铁素体不锈钢并测定表层和基体中铬和硅的含量 - Using cumulate-welding technology, a layer of WC hard metal was compounded on the matrix surface of hadfield steel, and high wear resistance and high toughness WC/ Mn13 composites was successfully fabricated.
采用堆焊工艺在高锰钢的基体表面复合上一层WC硬质合金材料，获得了一种具有高耐磨性和高韧性的复合材料。 - The key technical problems of the bond strength between the matrix and steel body, the concentricity and diamond segments sealing off from the body are successfully resolved in the studies.
本研究成功地解决了胎体与钢基体结合强度、同心度及金刚石掉块等关键技术问题。 - The results of experiments showed that the Nb can raise the depth of diffusion zone, hardness, wear resistance, strength and toughness of the nitriding layer of the matrix steel.
实验结果表明，铌能增加扩散层深度、硬度及耐磨性，提高渗层的强韧性。 - The Identification of Phases on the Magnetron Sputtering Ion Plating Aluminum Films on the Matrix of A3 Steel
A3钢基体磁控溅射离子镀铝膜的物相分析 - The multi-element Ni-Cr-Mo-Cu surface alloying layer on the matrix of low carbon steel 20 was investigated by means of the double glow plasma surface alloying technique.
在20钢基材上，利用双层辉光离子渗金属技术进行Ni-Cr-Mo-Cu多元共渗正交实验工艺研究。 - The formation of bulges at the surface of matrix steel resulted from hydrogen permeation into the steel during electroplating.
在电镀过程中，由于氢原子的渗入引起基材表层起泡。 - In this paper, electrical conductive polymer composites for shielding electromagnetic interference have been prepared with ABS and PP as matrix resins and stainless steel fiber as conductive filler.
以不锈钢纤维为导电填料，分别与ABS和PP复合，制得了电磁屏蔽用导电高分子复合材料。 - Cyclical Phase Transformation Strengthening and Toughening Treatment of the Matrix Steel Contained Niobium
含铌基体钢的循环相变热处理的研究 - Study on Surface Hardening of Cold-forging Dies Made of Matrix Steel
基体钢制冷作模具表面强化研究 - Combustion Synthesis of TiB_2/ TiC Locally Reinforced Steel Matrix Composites in Molten Steel Using Cu-Ti-B/ B_4C Systems
Cu-Ti-B/B4C系钢液内燃烧合成局部TiB2/TiC增强钢基复合材料 - In chapter two, the element stiffness matrix of steel frame which considered shear deformation of joint, second order effect and nonlinear property of material is deduced. And then, the structure is simplified as a series of mass points by static condensation method.
本文第二章首先推导了钢框架考虑节点剪切变形、二阶效应及材料非线性的单元刚度矩阵，然后运用静力缩聚法将结构化为质点串模型。 - Through researching into the computing theory of prestressing shell of hyperbolic paraboloids, the paper gives the unit rigidity matrix of prestressing steel cable, and presents the concepts of the whole rigidity assemblage.
本文进行了预应力扭网壳计算理论的研究，给出预应力索单元刚度矩阵，提出刚度聚合法概念。 - Mechanical properties of the matrix steel containing niobium
加铌基体钢的机械性能 - The stiffness matrix of semi-rigid steel frames and the fixed end moment are deduced, based on the connection element method incorporating the effects of joint flexibility.
采用连接单元法，考虑连接柔性的影响，推导出半刚性框架梁柱的刚度矩阵及半刚性梁的固端弯矩。 - Different matrix with steel, aluminum alloy and bakelite as well as aluminum-resin have different effect on the tool life, grinding machine efficiency and finish quality of abrasive products.
磨具的钢基体、铝合金、胶木以及新兴的铝酚醛等不同材质的基体对磨具的寿命、加工效率和加工质量有着不同的影响规律； - Effect of Ni on tempering process of matrix steel
Ni对基体钢回火过程的影响 - Resistance matrix of IF steel rolled in ferrite region
IF钢铁素体区轧制的变形抗力模型 - Steel skeleton reinforced HDPE is a new type of excellent performance steel-plastic composite materials, which uses thermoplastic polythene ( HDPE) as the matrix and the steel skeleton as the reinforced materials.
钢骨架增强HDPE是一种性能优良的新型钢塑复合材料。 - The matrix of steel is mainly ferrite, but pearlite also appears under certain conditions.
钢基体主要为铁素体，在一定条件下也可出现珠光体组织。 - Linear and nonlinear stiffness matrix of spatial steel column element is also deduced by the stress-displacement relation. The final results show the geometrical nonlinear stiffness equation of spatial steel column element.
利用应变-位移的关系，进一步导出空间钢柱单元的线性和非线性刚度矩阵，得到空间钢柱单元的几何非线性刚度方程。